PTAC Maintenance Guide


Here are some issues to do on a month-to-month foundation:

  1. Clean the filter. Sounds easy, however the quickest path to compressor failure or poor efficiency out of your PTAC tools is air circulate restrictions. A clogged filter can scale back air circulate to virtually nothing. Vacuum the filter and substitute. If it is actually soiled, extra thorough cleansing with gentle cleaning soap and water could also be obligatory.
  2. Check the swap, thermostat, and different useful controls on the unit. Most PTAC models have unit mounted controls, and issues get spilled, push buttons break, and knobs disappear. Replacing knobs and buttons and ensuring switches and thermostats function simply will stop customers from utilizing improvised instruments to push and switch.
  3. Check the facility twine for breaks within the insulation, particularly on models that should not have the brand new LCDI cords. Also make certain the plug suits cosy within the receptacle. A unfastened plug can arc and be a fireplace hazard or trigger issues for different electrical parts.
  4. Remove something from the highest of the unit that may trigger issues, akin to liquids that may spill into the unit.

On an annual foundation, a extra thorough inspection and cleansing could also be obligatory. Since PTAC models are instantly uncovered to the outside, they have a tendency to get particles and different undesirable issues inside them. These steps must be carried out by a educated skilled:

  1. Clean out any particles (leaves, lint, paper, the occasional lifeless critter). Check the place the unit seals in opposition to the wall sleeve for air leaks and restore as wanted. Being instantly uncovered to the weather, a PTAC that doesn’t seal correctly will give the looks of not functioning correctly.
  2. Clean the coils. Clean out giant particles with a vacuum or compressed air. Use a business coil cleaner to get the actually cussed dust. Be cautious when cleansing the evaporator coil to make use of a coil cleaner designed for the indoor coil. Some of the cleaners for outside coils are acid based mostly and are caustic. Clean the drain pan, clear any drain holes or hoses, and let the PTAC unit dry.
  3. Check the fan blades and blower wheels and shrouds for mildew or fungus. Also verify any insulation for similar. Treat with an antibacterial/antifungal cleaner, rinse and let dry totally.
  4. A PTAC usually has one or two fan motors. Some of the motors have oil ports. Oil the motors as obligatory per producers specs.
  5. Clean the within of the PTAC sleeve/cupboard. Remove any obstructions from drains, verify and restore any gaskets, and clear with an antibacterial/antifungal cleaner.
  6. Finally, verify for something close to the PTAC unit, each inside and out of doors that may impede efficiency. Trees or shrubs on the skin might have to be trimmed, mulch pulled again, and many others. Inside, containers, desks or different objects too shut the unit might trigger airflow issues. Move these away as obligatory.

Source by Greg McNary


Please enter your comment!
Please enter your name here